It is an elastomeric, hot-applied, bitumen-rubber based joint filler used at horizontal and vertical joints.
It is an elastomeric, bitumen-based, hot-applied filling paste especially used for filling joint gaps in rails.
If is a bitumen-rubber based, V-shaped elastomeric filleting tape used for preparing internal edges at vertical and horizontal seams for insulation applications.
It is a melting boiler with electric motor and electric heater used for controlled heating of bituminous products.
Bitumen-based, elastic waterproofing and adhesion mastics used for different purposes.
It is a bitumen-neoprene based, cold-applied sealant used for horizontal and vertical joints.
It is a bitumen-based, hot-applied insulation putty used for waterproofing underground junction boxes and electrical cables.
It is a two component, polyurethane based, high performance joint filler material which is developed for wide horizontal joints.
If is a double-component, polyurethane-bitumen based, cold-applied, self-levelling dilatation and joint filler with high mechanical and chemical strength.
EMULZER HDM PU 2K is a two component, cold applied, chemically curing, self leveling type, polyurethane based, coal tar modified,elastomeric sealant. It is resistant to jet fuels, oils, diluted acids and bases, various chemicals.
Swell-Flex is an active sodium bentonite/butyl rubber-based waterstop. It fills all the cracks, pores and capilleries on the concrete by expanding upon contact with water, and waterproofs concrete joints.
Swell-Flex Acrylic is a new generation high performance acrylic polymer based expanding tape. It is expands up to 300% when in contact with water.
It is a bitumen-based waterstop specially produced for cold joints. As an easy-to-apply alternative to usual waterproofing tapes, it does require additional materials. Bibaflex is not an expansion tape.
A triple component anchorage, fixing and filling mortar, containing epoxy resin, hardener, and filler. First type is for horizontal applications with fluid form and other one is for vertical applications with thixotropic properties.
It is a double-component, epoxy resin-based, non-solvent, thixotropic repair and mounting mortar.
Emülzer Thioseal is polysulfide-based, two component, pourable grade, elastic, cold applied sealant for horizontal joints. Emülzer Thioseal Thix is polysulfide-based, two-component, thixotropic, cold applied elastic sealant for vertical joints.
Emülzer PUR-WET Mastic is hybrid polyurethane based, single component, solvent free, ready to use sealing material.
EMULSEAL PU MASTIC 40 is a single component, humidity cured, polyurethane based elastic grouting mastic with high mechanic resistance. It is suitable for use in outdoor and indoor applications.