DDM 2K - Dilatation Filling Paste

Description
If is a double-component, polyurethane-bitumen based, cold-applied, self-levelling dilatation and joint filler with high mechanical and chemical strength.
Usage Areas
• It is used for waterproofing and filling horizontal dynamic dilatations and joints.
Advantages
• It is elastic. It maintains its elasticity between -20°C and +120°C.

• It is a cold-applied material.

• It is resistant to abrasion.

• As a self-levelling material, it is applied easily and quickly.

• It has very high adherence to the surface if is applied.

• It is very durable.
Application
The surface to be treated must be clean and dry.

• The joints must be cleaned with a wire brush, spiral engine or sandblasting.

• If possible joint spacing must be treated with compressed air.

• PU ASTAR should be used as a primer to achieve better adhesion.

• DDM 2K applied onto damp surfaces results in foaming.

• It is used only on horizontal joints.

• All the hardener contained in the small pail is mixed with all the main material contained in the big pail by using a low speed mixer until it becomes homogenous.

• The mixture has to be consumed within 30 minutes.

• Otherwise gelling occurs and it cannot be recovered.

• After the application the surface must be protected from water exposure for at least 6-8 hours
Consumption
1,3 kg/dm3.

Example: For joints with 20 meters lenght 5 cm width and 3 cm depth 20 m x 0,05 m x 0,03 m x 1,3 kg/dm3 x 1000 = 39 kg of product used.
Packaging
4 kg + 1 kg = 5 kg Set
60 Sets / Pallet