Bitumen Melting Boiler

Description
It is a melting boiler used for controlled heating of bituminous products.

Usage Areas
Penetration and blown bitumen varieties are used for melting Emulderz Bituminous Joint Sealant, Emulderz Ray bituminous sealant, Rebastar Reflective tape primer and similar products. It is only offered for sale together with the products.

Technical Specifications

Boiler volume : 250 liters
Height: 100 cm Width: 72 cm Height: 150 cm
Heat transfer oil : Shell Thermia B
Fuel : LPG with tube

Advantages
• Allows the use of bituminous products without exceeding the maximum application temperature.
• Allows melting in bulk.
• Melting is carried out without heat loss thanks to external thermal insulation.

Boiler Preparation
• The boiler should be placed in a place with as little wind as possible, and the wheel brakes should be fixed.
• The LPG tube should be connected to the heating apparatus with a long hose and placed away from the boiler.
• Care should be taken to ensure that the reflective “Emul Jul®” boards located on the 4 sides of the boiler are clean.
• If the heat transfer oil is missing, it should be added from the filling valve, but it should be remembered that the oil may expand and overflow after the boiler heater is burned. Overflowing oil should be collected by installing a container on the filling valve.

Application

The screw mixer should be mixed with the manual lever at short intervals December and the melting of the material should be facilitated. The insulated hinged lid should be kept closed to prevent heat loss. The bituminous product that reaches the specified temperature is taken to the bulk buckets from the 2" outlet valve.

Boiler Cleaning
The product inside should be emptied while it is still hot. Diesel or industrial solvents can be used after the boiler has cooled completely for a complete cleaning.