Emulseal PU Mastic - Pu Based, Single Component, Elastometric Mastic

Description
EMULSEAL PU MASTIC 40 is a single component, humidity cured, polyurethane based elastic grouting mastic with high mechanic resistance. It is suitable for use in outdoor and indoor applications.
Usage Areas
• In vertical and horizontal indoor and outdoor expansion joints of buildings
• In flooring movement and hinge joints
• In Parapet corner joints of roofs and terraces
• In joint details of prefabricated elements
• In joints that can be maneuvered up to 25%
• In roof conduits and parapet joints
• On edges of windows and doors
Application
• It can be applied without using a primer. By means of polyethylene cords the adhesion of Emulseal PU Mastic 40 on the joint bottoms is prevented. This provides two directional movement capability.
• The diameter of the polyethylene cord must be 20 to 25% wider than the width of the joint.
• The width and depth of the joint must not be less than 5 mm. Up to 15 mm the width of the joint must be equal to its depth. For wider joints, the depth must be arranged to be between 20-25 mm.
• In manual applications, the material is places in an application gun and injected into the joint without causing the formation of any air bubbles.
• The joints on the edges of the windows must at least be 10 mm wide.
Advantages
• It is elastic and preserves its elasticity between -40°C to +70 °C.
• It has single component composition. It is applied easily and quickly.
• It can be painted after it’s curing period.
• It is ready for use and applied cold.
• It is cured by means of the humidity in the air.
• It has high elasticity.
• Achieves excellent adherence with concrete, metal, wood and other construction materials.
• It can be applied on many surfaces without a primer. Its adherence to the application surface is very high.
• It is cured without formation of bubbles.
• It has chemical resistance.
• It is suitable to contact with potable water.
(ODTÜ Report No.: 2014.03.04.451 / Report Date: 16.07.2014)
Surface Preparation
The joints must be free of oil, dust, dirt and previously used materials. EMULSEAL PU MASTIC 40 is affected from water therefore the joints must be dry and contact with water must be avoided until the product is fully dry.
Consumption
1,150 kg/dm3
Packaging
600 ml Sausage - 24 Sausages / Box
280 ml Cartridge - 25 Cartridges / Box
45 Boxes (1080 Sausages) / Palle