Get Support

123-456-789-10

TR | EN | RU | ES | AR

Izola Export - Anionic Bitumen Emulsion

Description
It is a ready-to-use waterproofing material obtained by mixing water and bitumen by using special methods. It adheres firmly to the surface it is applied, forming a waterproof layer.It is a ready-to-use waterproofing material obtained by mixing water and bitumen by using special methods. It
adheres firmly to the surface it is applied, forming a waterproof layer.
Usage Areas
• İzola can be used as an undercoat prior to all bituminous membrane applications. Thanks to its superior adherence characteristics, it allows the bituminous membranes under which it is applied to adhere firmly to the surface they are applied, leaving no gap in between.
• It is used to insulate water leakage on all horizontal and vertical surfaces in closed spaces such as foundations, underground storehouses and basements, and in damp environments such as bathrooms, kitchens and toilets, etc.
For the applications requiring durability against higher water pressure, and on cracked surfaces, it must be reinforced with materials such as fiber glass, polyester felt, reinforcing fabric, etc.
• The alum material obtained by mixing İzola with sieved fine sand and cement is applied with a trowel to smooth out and level the surface, or to provide a protective coat over insulation.
• In parquet flooring applications with hot bituminous materials, it is applied over the alum as an undercoat.
• It is applied onto construction molds for easy demolding, and to provide a smooth surface. It prevents concrete curing water from damaging molds.
Advantages
• It is very economical.
• Due to its inflammable and non-toxic characteristics it can be safely used in closed spaces.
• Because it is thinned with water, it adheres perfectly to all kinds of surfaces, even when the surface is moist.
• By the evaporation of the water it contains, it forms a waterproof and water-insoluble layer.
Application
• İzola is a cold applied material.
• After having mixed with water with a ratio of approximately 20%, it is applied with a bitumen brush, roller, or pistol.
• Depending on weather conditions, it dries in approximately 4-5 hours.
• It should not be applied in rainy weather, or at temperatures below +5°C.
• Each coat must be applied only after the preceding one is completely dry.
Consumption
400 g/m² for each coat
Packaging
17   kg Metallic Case - 45 Pieces / Pallet
200 kg  Iron Barrel

 

PROPERTIES

UNIT

VALUE RANGE

TEST METHOD

RESULT

Min.

Max.

Density

g/L

980

1080

TS 132

1080

Evaporation Residue

%

45

55

TS 132

55

Ash Amount of Residue

%

5

25

TS 132

9

The Amount of Water

%

_

55

TS 132

44

Stiffness of Asphalt Layer After Curing

Hour

_

24

TS 132

20

Solid Content Ratio

%

 

 

 

50±1

Application Temperature

0C

 

 

 

5 - 35

Softening Point

0C

 

 

 

70

Drying Time

Saat

 

 

 

Touching :1 Hour        Full Drying : 5-6 Hours Test : 8 Days

 

 

SUBSTANCE

CONSANTRATION

(%)

TEMPERATURE

(≤300C)

TEMPERATURE

(≤650C)

Salt Solutions

 

+

+

Chlorides

 

+

+

Nitrates

 

+

+

Sulphates

 

+

+

 

Türk Malı
Türk Ak
İzoder
Suder
Szutest