Get Support

123-456-789-10

TR | EN | RU | ES | AR

Elastokote 1K Bitumen-Rubber Based, Single Component Liquid Membrane

Description
Elastokote is a bitumen-rubber based, ready to use, single component liquid membrane with elastomeric additives, and it is used for insulating water and humidity. By the evaporation of the water it contains, it adheres firmly to the surface it is applied, forming an elastic waterproof layer.
Usage Areas
• It can be used on all horizontal and vertical surfaces.

• It is used for the insulation of foundations, underground storehouses, and basements.

• It is used for insulating water leakages in closed damp environments such as bathrooms, kitchens, toilets, etc.

• For the applications requiring durability against higher water pressure, and on cracked surfaces, it must be reinforced with materials such as polyester felt, reinforcing fabric, etc.

• The alum material obtained by mixing Elastokote with sieved fine sand and cement is applied with a trowel to smooth out and level the surface, or to provide a protective coat over insulation.
Advantages
•It can be easily applied by anyone.

•It provides a seamless insulation layer.

•As a water-based material it is environment friendly.

•Due to its inflammable and non-toxic characteristics it can be safely used in closed spaces.

•Because it contains water, it enables good adhesion even when the surface is moist.

•It provides permanent elasticity.

•It is ready to use.

•As a cold applied material, it does not require heating or thinning.

•It can cover capillary cracks.
Application
•The surface must be undercoated with Emilkote or izola.

•As a cold applied, prepared material, Elastokote should not be used with thinner.

•It can be applied with a bitumen brush, or trowel.

•Depending on weather conditions, it dries in approximately 4-5 hours.

•It should not be applied in rainy weather, and at temperatures below +5°C.

•Each coat must be applied only after the preceding one is completely dry.
Consumption
1 kg/m² for each coat (with trowel)
Ambalajları
23 kg Pail - 33 Pieces / Pallet

Poz. No.

19.082/1

BASE

Bitumen-Polymer (Acrylic) Resin

THINNER

Water

COLOUR

The color of Petroleum before use, Black after use

CONSISTENCY

Viscous Liquid

DENSITY

1,03 kg/dm3

VISCOSITY

6400 cP

pH

10 – 10,5

APPLICATION TEMPERATURE

Between  (+5°C) / (+35°C)

SERVICE TEMPERATURE

Between (-25°C) / (+80°C)

BITUMEN RATIO

58% (±2)

RUBBER RATIO

13% (±0.5)

CURING TIME

Touching    :1 hour                                                                  

Full Drying  :5-6 hours                                                              

Test             :8 days

CARBONDIOXIDE PERMEABILITY

418,24 m

WATER VAPOUR PERMEABILITY

14,293 m

WATER PERMEABILITY

0,025 kg/m2.h0,5

BOND STRENGTH

0,6 N/mm2

CRACK BRIDGING

PASSES TS EN 15812 CB2

ELASTICITY

350% (±1%)

(At 23°C and %50 relative humidity. Higher temperatures decrease; lower temperatures increase the times given.)

Türk Malı
Türk Ak
İzoder
Suder
Szutest