Emülzer® CSP is a ready-to-use waterproofing bituminous solution with a rubber additive. It does not contain any filling material. By the evaporation of the solvent it contains, it adheres firmly to the surface it is applied, forming a waterproof layer.
Description
Emülzer® CSP is a ready-to-use waterproofing bituminous solution with a rubber additive. It does not contain any filling material. By the evaporation of the solvent it contains, it adheres firmly to the surface it is applied, forming a waterproof layer.
Usage Areas
• It is used in grounds, piles, and retaining and pitch walls against ground moisture and water leakage.
• It is used in the terrace roofs made of reinforced concrete, in balconies, and in secret gutters against rainwater.
• It is used for the insulation of galleries, drainage and sewage channels, and collectors.
• It is used for the insulation of pools, and service water storage tanks with open top.
• To protect metallic surfaces (casting, sheet iron, etc.) against corrosion, it can be applied by dipping, brushing, or spraying.
• It is used as an undercoat in all kinds of bituminous membrane applications on metallic surfaces.
Application
• Emülzer® CSP is applied only onto the side exposed to water (positive insulation). As a prepared material, it does not require heating, or thinning.
• It can be applied with a brush, roller, or pistol.
• To avoid dust and improve durability, non-metallic surfaces can be undercoated with Emilkote®.
• Although Emülzer® CSP dries fast-in as little as 1 hour-it is recommended to wait 24 hours before applying a second coat.
• To provide durability against higher pressure, it must be reinforced with materials such as glass fibre, felt, reinforcing fabric, etc.
• When it is used on the roofs which are continuously exposed to outdoor conditions (except walking), it is recommended to apply Alütec® over Emülzer® CSP to provide improved aesthetics as well as protection against sunlight.
Advantages
• It is ready to use.
• As a cold applied material, it does not require heating, or thinning.
• It dries very fast.
• It provides a seamless insulation layer.
• It has high sulfate resistance.
Consumption
500 g/m² for each coat
Packaging
4,5 kg Metallic case - 140 Pieces / Pallet
17 kg Metallic case - 45 Pieces / Pallet
200 kg Sheet iron barrel