Emülzer ® ALC Water Based Liquid Coating With Rubber Additive

Description
Emülzer® ALC is single component, water based, ready-to-use liquid coating with rubber additives. It contains elastomeric polymer resin additives. By the evaporation of the water it contains, it adheres firmly to the surface it is applied, forming an elastic waterproof layer.

Usage Areas
• It can be used on all horizontal and vertical surfaces.
• It is used for the external insulation of foundations, underground
constructions, basements. etc.
• It is used for insulating water leakages in closed damp
environments such as bathrooms, kitchens, toilets, etc.
• For the applications requiring durability against higher water
pressure, and on cracked surfaces, it must be reinforced with
materials such as polyester felt, reinforcing fabric, fibermesh, etc.
• The alum material obtained by mixing Emülzer® ALC with sieved
fine sand and cement is applied with a trowel to smooth out and
level the surface, or to provide a protective coat over insulation.

Advantages
•It can be easily applied by anyone.

•It provides a seamless insulation layer.

•As a water-based material it is environment friendly.

•Due to its inflammable and non-toxic characteristics it can be safely used in closed spaces.

•Because it contains water, it enables good adhesion even when the surface is moist.

•It provides permanent elasticity.

•It is ready to use.

•As a cold applied material, it does not require heating or thinning.

•It can cover capillary cracks.

Application
• As a cold applied material, Emülzer® ALC should not be used with thinner. After mixing, it can be applied with a bitumen brush, airless pump or trowel. Depending on weather conditions, it dries in approximately 5-6 hours.
• It should not be applied in rainy weather, and at temperatures below +5°C.
• Next layer should not be applied before preceding one completely dries.

Consumption
Depending on surface and workmanship 1-3 kg/m².

Packaging
16 kg Plastic Pail