Fiber Added Beyazcoat

Description

As an asphalt and solvent-free superior waterproofing material, Beyazcoat is applied in liquid form, and upon setting, it becomes a very elastic, impermeable, seamless, and durable coating. Fiber Added Beyazcoat is reinforced with strengthening fibres.

Usage Areas

• Beyazcoat can be used for waterproofing and damp-proofing a wide range of building materials such as concrete, plaster, brick, glazed tile, cement brick, gas concrete, wood, galvanize, iron sheet and zinc.

• It can be safely used on all vertical and horizontal surfaces made of these materials; on roofs and terraces; for repairing window frames, drip moldings, water ducts, eaves, raindrips, strainers and chimney bottoms.

• It can be used in wet areas like bathrooms and kitchens.

Advantages

• Beyazcoat is fully impermeable.

• Beyazcoat is a highly durable, inflammable, tar, asphalt and solvent-free waterproof sealant. It can be painted.

• It is very easy to apply, and as a semi-fluid material it works very good even on the hardest-to-cover surfaces.

• It is elastic. Its elongation is up to 300% at 1 to 1,5 mm thickness.

• It has perfect adherence to all types of building materials.

• Its elasticity is resistant to temperature changes.

• It is resistant to light chemicals.

• Its microporosity provides breathability for the surfaces.

• Thanks to biocids, it inhibits bacteria and mildew growth.

• As a decorative material, it is produced in white, but it can be easily tinted by using tube colorants which are easily available in the market.

Application

• Depending on the condition of the surface, Beyazcoat, 1:1 diluted with water, is applied as an undercoat, and over this undercoat Fiber Added Beyazcoat is applied at least in two coats without thinning.

• Each coat must be applied after 24 hours maximum, and each application must be vertical to former application.

• Beyazcoat requires a protective topcoat when it is applied to water storage tanks, or any surfaces exposed to foot traffic or other mechanical strokes.

Application of Terraces

• The surface to be treated must be dry, clean, and free from dust, dirt, rust, and grease.

• There must be slope to prevent water pods.

• Filleting and repairing on the surface must be done with cement mortar without lime.

• 1:1 diluted with water, is applied as an undercoat.

• After 24 hours, Beyazcoat must be applied with roller or brush in two coats.

• Vertical and horizontal connection points must be reinforced with corner tape, when the first layer is still wet.

Consumption

0,750 kg/m2 in vertical application and 1,500 kg/m2 in horizontal application.

Packaging

4,5 kg Pail - 80 Pieces / Pallet

19 kg Pail - 33 Pieces / Pallet