Speed-X Powder - Stopper for Accelerated Setting

Description
It is an accelerated setting powder stopper for water leakages. It contains mineral fillers, special cements and polimer catalyst additives. It is not a waterproofing product. After the application of Speed-X Powder, a waterproofing product must be applied on the surface.
Usage Areas
• It is used for stopping pressured water leakages, strong water flows, and capillar water leakages as well as inhibiting humidity.
• It is an immediate solution to stop water leakage in foundation curtain walls, basements, water tanks, elevator shafts and damaged water pipes.
• It can be used on concrete, plaster, alum, and bricks.
Advantages
• It is easy and fast applied product.
• It is an ideal material for urgent insulation applications.
• It dries very fast. It stops water leakage in a very short period of time.
• Any type of waterproofing product can be applied on to Speed-X Powder after 15-20 minutes.
• It does not shrink or crack.
• It does not contain any chloride.
• It can be applied from the opposite direction of water flow (negative water pressure).
Application
• 1 unit of water is mixed with 2,5-3 units of Speed-X Powder until it becomes homogenous. (Quantity should be arrange as to consume 2-3 minutes.) The paste form of Speed-X Powder must be pressed onto leakage area with rubber gloves for approximately two minutes.
• Reaction occurs just 1 minute after adding water, so the mixture must be prepared in small amounts and consumed immediately.
• In case of dense leakage, Speed-X Powder can be applied directly in powder form. If it has to be applied onto a large
surface, the direction of the application must be from outer sides to the middle.
• After the Speed-X Powder application finished, Emülzer® Permo-Chim Crystal must be applied directly.
• At low temperatures the mortar must be prepared with hot water.
Consumption
1,600 kg - 2 kg for 1 It of filling mixing with 0,5 lt water
Packaging
5 kg Plastic Pail
75 Pails / Pallet