Epoxy Coal Tar 85/15 Solvent-Free, Epoxy - Coal Tar Based Coating

Description
Epoxy Coal Tar 85/15 is a two component, epoxy-coal tar based, solvent free, low viscosity coating material.
Usage Areas
Epoxy Coal Tar 85/15 has been specifically developed for coating and waterproofing on concrete, metal, wood and likely materials.
Application
Mixing : Mix the content of Part A thoroughly for 1 minute before adding Part B. Mix together until a smooth even consistency is achieved. It is important that the entire quantity of part B is added to part A.
Mixing Time : Mix thoroughly for a minimum of 3 minutes.
Mixing Tools : Use a low speed electric stirrer (300-500 rpm).
Application Method /Tools: Immediately after mixing, the coating material is applied on the prepared surface by roll, brush or spray. Applied surface must be protected from water for 4-5 hours.
Advantages
• It fills the pores on concrete and metal surfaces.
• It is easy to use material. After it is cured, it becomes hard and firm paint.
• Excellent resistance against mechanical influences, oil and chemicals.
• Solvent free. Can be used in closed areas.
• Excellent adhesion to common surfaces like steel, concrete, stone, artificial stone, wood, etc. Adhesion does not deteriorate if product submersed in water, sea water, sewage and oils.
Surface Preparation
Surfaces must be clean and dry. Oil, grease, bitumen or sealant remains must be completely removed. Loose materials on the surface must be removed; broken surface must be repaired.
Humidity must be max %5.
Consumption
At each layer 0,300–0,450 kg/m²
Packaging
8,5 kg Bitum + 1,5 kg Hardener = 10 kg Set