Asphalt - 75/100 Penetration Bitumen - 40/50 Blown Asphalt - 10/20 Blown Asphalt

Description

Bituminous materials obtained as a result of distillation in petroleum refineries.

Usage Areas

• It is used as a hot-applied waterproofing material.

• It is used for adhering wooden parquets.

• It is used as a skidder in the machines operating at very high temperatures.

• It is used as a supplementary material in battery and rubber production.

• It is used for highway surfacing

Advantages

• It is easily available.

• It is a most economical adhesive

Surface Preparation

• The surface to be treated must be clean and dry.

• The loose particles, dust, excess water and ice, if any must be cleaned.

• To provide excellent adherence, and improve durability, surfaces can be primed with Emilkote®, or Emülzer® CSP.

• Cracks and pores must be filled with Emülderz Joint Filler

Application

For insulation:

• It is heated up to approximately 180°C and applied to the surface with a brush. For parquetry:

• The parquets are dipped into melted asphalt, and adhered to the surface one by one.

• It is heated up to approximately 180°C and applied to a small area with a brush or trowel, and then the parquets are adhered before it gets cold.

Consumption

1-1,5 kg/m3 for each coat

Packaging

17 kg Metallic case

Bulk in sheet iron barrel

Bulk in truck