Permo-Chim MONOCORR - Corrosion Protection and Bonding Agent Mortar

Description
Permo-Chim MONOCORR is a cement based, one component, polymer modified, anti-corrosion coating and bonding agent mortar.
Usage Areas
• As a corrosion protection for steel reinforcement in concrete
• Bonding agent for concrete repair mortars.
Advantages
• Mixed with water only, easy to apply.
• Active corrosion inhibitors for added protection
• Sprayable by wet spray method
• Adjustable consistency
• It provides high adherence to concrete and reinforcement.
• High mechanical strength.
• Protects reinforcing steel against moisture.
Application
Proper amount of water, clean with the help of a scale is poured into the mixing bucket. Permo-Chim MONOCORR slowly added 400 - 600 rpm homogenous and lump-free mixture with a mixer. The mixture is stirred for 4 minutes. After resting for about 4 minutes and mixing again for 30 seconds, the material is ready for use.
Application Method As Primer
The prepared mortar is applied to the surface by brush or spraying in a thickness not exceeding 1 mm in one layer. On highly absorbent surfaces, the second coat may be applied after the first coat has
dried (after 3 -4 hours). 30 minutes after the application is completed, concrete surfaces can be covered with repair mortar.
As Anti-Corrosion Coating
The prepared mortar should be applied all over the prepared iron reinforcement with a soft paint brush. To obtain a 2 mm thick coating, the application should be done in two coats. The second layer should be applied after the first layer has been dried by scratching (3-4 hours at +23°C) while cleaning the surface with a brush.
Consumption
1,55 kg powder product for 1 liter mortar.
Packaging

25 kg Kraft Bag

5 kg Plastic Pail