Definition
3-4 mm thick bituminous membranes reinforced with polyester felt. One side coated with silica sand and other side covered with PE film.
Usage Areas
It is used at flat roofs ,terraces ,inclined roofs, balconies, plant stands, garden terrace against UV degradation. Also can be used in wet areas such as, kitchen, bathroom, wc under tile applications.
Advantages
Thanks to polyester felt reinforcement, they offer high tensile strength and extension strength.
Surface Preparation
Surface must be dry and clean before application. Any loose pieces, dust, oil, grease should be removed. If necessary use “Emilkote” as a primer.
Application
They can be adhered to Emülzer® C or Emilkote primed surfaces by torch application. At seams they should overlap 10 cm horizontally, and 15 cm vertically. They are used as the first coat in shingle, slated or aluminum foiled membrane applications. Bituminous membranes must be applied at least two layers and second layer must overlap the first one 50 cm sideways and 5 meters longitudinally.
Package (1x10m = 10 m2 roll)
EM 300 PS 30 Roll / Euro Pallet
EM 400 PS 25 Roll / Euro Pallet
|
unit |
STANDART |
300PAR |
400PAR |
Carrier Type |
- |
- |
Polyester |
Polyester |
Carrier Weight |
gr/m2 |
- |
160 |
180 |
Top Surface Coating |
- |
TS 11758-1 |
Silica Sand | Silica Sand |
Bottom Surface Coating |
- |
TS 11758-1 |
PE Film |
PE Film |
Height |
m |
TS EN 1848-1 |
10 |
10 |
Extent |
m |
TS EN 1848-1 | 1 | 1 |
Thickness |
mm |
TS EN 1849-1 |
3 |
4 |
Deviation from Neatness |
mm |
TS EN 1849-1 |
10 m max. 20 mm |
10 m max. 20 mm |
Bending from Cold ( Maximum) |
C |
TS EN 1109 |
-10 |
-10 |