Get Support

123-456-789-10

TR | EN | RU | ES | AR

Inner Corner Waterproofing Tape

Description

It is a thermoplastic elastomer (TPE) based, elastic, inner and outer corner joint waterproofing tape with polyester mesh bearing used for waterproofing building and dilatation joints.

Usage Areas

• It is used for waterproofing; floor and wall intersections in damp environments that will be coated with seramic such as bathrooms, kitchens, toilets, terraces and balconies.

• Moving joints,

• Corner intersections and joints in reinforced concrete or precast roof gutters,

• Pipe intersections,

• For repairing cracks in the pools. At corner intersections and dilatations,

• For repairing cracks on plaster and alum

Advantages

• Can be applied to bituminous surfaces.

• Highly resistant to tearing.

• Easy to apply.

• Protects its elasticity during temperature changes.

• Resistant to weak chemicals.

Surface Preparation

The surface to be treated must be free from grease, dirt, dust, residues and free particles which may impede adherence. To protect the tape against strokes Emulseal PU Mastic must be applied onto corner intersections. The surface must be prepared according to the type of the waterproofing material that will be used.

Application

First of all, waterproofing material must be applied onto the surface in two coats and then the side wings of Emülzer ® Joint Insulation Tape must be placed on the surface when the material is still wet. The tape must be pressed smoothly with a trowel or brush and embedded into the waterproofing material. Emülzer® Joint Insulation Tape is covered completely with a second coat of waterproofing material. The tape should not contact with the rubber part found in the middle of the waterproofing material.

Türk Malı
Türk Ak
İzoder
Suder
Szutest