PP Fiber (6-12-18 mm)

Description
100% synthetic fibers for reinforcement of hydraulic binder mixture against shrinkage cracks. It is traditional reinforcing material made of PP - polypropylene by melting, extruding, quick-spinning and stretching.
Usage Areas
PP FIBER specially designed for drymix mortar, screeds, overlays as well as plasters and light industrial floors.
Advantages
•Basic properties and advantage is inhibiting plastic and settlement shrinkage cracks in early age of concrete.
•Those individual fibers stopped the thermal cracking without destroying the surface quality and performance.
•Its surface is treated chemically for perfect distribution on concrete mixture paste.
•It is compatible with all types of Portland Cement Types and Grades. Recommendations for.
Application
PP Fiber should be ideally added to the batching plant. In case of site mixing, additional mixing time of 3 to 5 minutes (70 cycles) is necessary to ensure that the product is fully degraded and to ensure uniform fiber dispersion throughout the mix. If mixing is at the batching plant, fiber should be added first along with half of mixing water.
After all the other ingredients have been added, including the remaining mixing water the concrete or mortar should be mixed for a further few minutes at full speed to ensure uniform fiber dispersion.
Consumption
6 mm PP fiber 100 - 150 gram per 50 kg cement in mortar and drymix.
12 mm PP fiber 1 bag (600 g) pre-dosed for 1 m3 of concrete or screed
18 mm PP fiber 1 bag (900 g) pre-dosed for 1 m3 of concrete or shotcret
Packaging
6 mm: 0,600 kg/paper bags-bulk
12 mm: 0,600 kg/paper bags-bulk
18 mm: 0,900 kg/paper bags-bulk