Description
Bituminous materials obtained as a result of distillation in petroleum refineries.
Usage Areas
It is used as a hot-applied waterproofing material.
It is used for adhering wooden parquets.
It is used as a skidder in the machines operating at very high
temperatures.
It is used as a supplementary material in battery and rubber production.
It is used for highway surfacing.
Application
For Insulation:
It is heated up to approximately 180°C and applied to the surface with a brush.
For Parquetry:
The parquets are dipped into melted asphalt, and adhered to the surface one by one.
It is heated up to approximately 180° C and applied to a small area with a brush or trowel, and then the parquets are adhered before it gets cold.
Consumption
1-1,5 kg /m2 for each coat
Packaging
Net: 17 kg Metallic Case
Bulk in sheet iron barrel
Bulk in truck
ASFALT ÇEŞİDİ | 70/100 | 40/50 | 10/20 | ||
T.S. | 105 | 105 | 105 | ||
TİP | I | II | III | ||
POZ. NO. | 04.610 | 04.610 | 04.610 | ||
PENETRASYON (25C, 5g) | 70/100 | 40/50 | 10/20 | ASTM D 5 | EN 1426 |
YUMUŞAMA NOKTASI (°C) | 43-51°C | 60-70 | 80-100 | ASTM D 36 | EN 1427 |
AĞIRLIK DEĞİŞİMİ(ISINMA KAYBI)(en çok) | %0,8 | ASTM D 6 | |||
ALEVLENME NOKTASI (Minimum) | 230 | 230 | 232 | ASTM D 92 | EN 22592 |
Kalıcı batma (Resid’in RTFOT sonrası batma değerinin ısıtma öncesi batma ile mukayesesi) | %46 enaz | ASTM D 5 | EN 1426 | ||
DUKTİLİTE (25°C, 5 cm/dak.)(Minimum) | 10 cm | 3 cm | 1,3 cm | ASTM D 113 | |
SERTLEŞME SONRASI YUMUŞAMA NOKTASI | 45°C | ASTM D 36 | EN 1427 | ||
TRİKLORETİLENDE ÇÖZÜNÜRLÜK (% AĞIRLIK) | 99 | 99 | 99 | ASTM D 2042 | EN 12592 |