Thioseal / Thioseal Thix Polisulfide Two Component Joint Sealant

Description
Emülzer Thioseal is polysulfide-based, two component, pourable grade, elastic, cold applied sealant for horizontal joints.

Emülzer Thioseal Thix is polysulfide-based, two-component, thixotropic, cold applied elastic sealant for vertical joints.
Usage Areas
-Airports, aprons and hangars.
-Garage floors
-Fuel facilities.
-Factory floors.
-Terraces
-In general flooring joints.
-Expansion joints
-Aqueous acid and caustic tanks
-Prefabricated structure joints.
Technical Properties
Advantages
• Cold applicable, heating is not required.
• Resistant to fuel oil and hydraulic fluid.
• Self-levelling
• Tough rubbery seal that is not affected by climatic variations.
• Resistant to dilute acids, dilute alkalis, petroleum, aviation fuel, diesel fuel, kerosene and white spirit
Surface Preparation
Joint surfaces must be clean and dry. Oil, grease, bitumen or sealant remains must be completely removed. Loose materials
on the joint walls must be removed; broken joint walls must be repaired.
The joint should be cleaned with compressed air, if it is possible.
After surface cleaning, EMÜLZER PU PRIMER should be used as primer.
Application
Each set includes proper amount of component A and B. Firstly Componenet B must be stirred in its own package. Then
entire quantity of component B is added to component A.
The mixture is prepared by stirring Comp. A and B for 5 min. with a low speed electric stirrer (200-400 rpm).
The mixture should be applied immediately.
Packaging
Thioseal        : Net 4 kg Set
Thioseal Thix : Net 3,5 kg Set