Get Support

123-456-789-10

TR | EN | RU | ES | AR

Elastorene Water-Based, Super Elastic Liquid Membrane

Description
Elastorene, fast-setting waterproofing material offering high performance and elasticity. In addition to its high elasticity properties, this material also has excellent adherence to metal and concrete surfaces.
Usage Areas
• Building foundations,
• Basement floor and walls,
• Sustaining walls,
• Tunnels and canals,
• Closed roof and porches
Application
• As a cold applied material, Elastorene should not be used with thinner.
• It can be applied with a bitumen brush, airless gun or trowel.
• Depending on weather conditions, it dries in approximately 5-6 hours.
• It should not be applied in rainy weather, and at temperatures below +5°C.
• Next layer should not be applied before preceding one completely dries.
• For the applications requiring durability against higher water pressure, and on cracked surfaces, it must be reinforced with materials such as polyester felt, reinforcing fabric, fibermesh, etc.
Advantages
• Easy to apply material.
• Provide a seamless insulation layer.
• As a water-based material, it is environment friendly.
• Do to its inflammable and non-toxic characteristics it can be safely used indoor areas.
• It provides permanent elasticity.
• Ready to use.
• As a cold applied material it does not require heating and thinning.
• It has ability to cover up capillary cracks.
• Instantly applicable, no need to wait for concrete curing.
Surface Preparation
• The application surface should be without dust, rust, dirt, grease and oil and the loose parts should be scrapped out.
• Emilkote® bitumen emulsion on concrete surfaces and Emülzer® C on metal surfaces can be used as primer.
• The sharp corners or horizontal-vertical joints subject to cracking should be rounded with Emülzer® Bituminous Fillet.
• The large pores and the cracks should be filled with Emülderz® bituminous elastic joint filler.
Consumption
1 kg/m² for each layer. Min. 2 coats.
Packaging
23 kg Metallic Pail - 33 Pails / Pallet

BASE

Elastomeric polymer resin reinforced bitumen emulsion

THINNER

Water

COLOUR

The color of Petroleum to brown before use, Black after drying

CONSISTENCY

Viscous Liquid (thixotropic) in packaging, fluid liquid when it is mixed

DENSITY

1,02 kg/dm3

APPLICATION TEMPERATURE

Between  (+5°C) / (+40°C)

SERVICE TEMPERATURE

Between (-10°C) / (+60°C)

SOLID CONTENT

60%

DRY FILM THICKNESS

2,5 – 4 mm

FLASH POINT

Not flammable

CURING TIME

Touching    :1 hour                                                                  

Full Drying  :5-6 hours                                                              

Test             :5 days

CARBONDIOXIDE PERMEABILITY

>50 m (TS EN 1062-6)

WATER VAPOUR PERMEABILITY

5m<SD<50m (Class II) (TS EN ISO 7783-2:2002)

WATER PERMEABILITY

<0,1 kg/m2.h0,5 (TS EN 1062-3)

RESISTANCE TO WATER PRESSURE

>1 atm, 24 hours (DIN 52123)

ELONGATION AT BREAK

>1200%

FLEXIBILITY AND CRACK BRIDGE AT LOW TEMPERATURE

PASSED (TS EN 15812)

RESISTANCE TO SOIL BACTERIAL (30 DAYS, 400C)

PASSED (ASTM D 3080)

BOND STRENGTH

>0,8 N/mm2 (TS EN 1542:2001)

 (At 23°C and %50 relative humidity. Higher temperatures decrease; lower temperatures increase the times given.)

Türk Malı
Türk Ak
İzoder
Suder
Szutest